The Ultimeg 2000-378 anti-tracking varnish provides a tough, impervious, insulating seal in difficult environments. The system dries rapidly in thin film to give very effective sealing off of electrical leakage paths together with excellent noise reduction characteristics. The cured product conforms to BS 5629 type 1.1 (IEC 85), has excellent resistance to transformer oils and moisture, and is suitable for use in Class B and F insulating systems. A low hazard fungicide is included in the varnished enamels, which gives a 0 rating (no growth) fungal resistance when tested to BS 3900 PTG6. This makes the system particularly suited for tropicalisation and for use on equipment working in warm humid climates.
The Ultimeg 2000-378 anti-tracking varnish provides a tough, impervious, insulating seal in difficult environments. The system dries rapidly in thin film to give very effective sealing off of electrical leakage paths together with excellent noise reduction characteristics. The cured product conforms to BS 5629 type 1.1 (IEC 85), has excellent resistance to transformer oils and moisture, and is suitable for use in Class B and F insulating systems. A low hazard fungicide is included in the varnished enamels, which gives a 0 rating (no growth) fungal resistance when tested to BS 3900 PTG6. This makes the system particularly suited for tropicalisation and for use on equipment working in warm humid climates.
|
Product name:
|
AEV® ULTIMEG 2000-378
ANTI-TRACKING ENAMELS AND VARNISHES
|
|
Country of origin:
|
manufactured in Malaysia, formula designed and invented in the United Kingdom
|
| Thermal class: |
F (155oC)
|
|
Resin type:
|
Alkyd
|
|
Colour:
|
clear yellowish |
 |
|
|
Standard package:
|
1) 6 x 4 kgs steel tins packaged into one carton box
2) 1 x 16 kgs steel tin packaged into one carton box
3) 200 kgs drum
|
|
|
|
|
Package dimension (LxWxH) and nominal gross weight:
|
1) 4 kgs steel tin: 170 x 105 x 315 | (G.W: 4.4 kgs)
2) carton box: 6 x 4 kgs steel tins : 345 x 335 x 340 (G.W: 26.9 kgs)
3) carton box: 1 x 16 kgs steel tin: 250 x 250 x 370 | (G.W: 17.0 kgs) |
| Compositions: |
XYLENE: 50-70%
WHITE SPIRIT: 5-10%
2-OCTYL-2H-ISOTHIAZOL-3-ONE: <1% For more information, please refer to the MSDS (Material Safety Data Sheet) below. |
|
Exposure controls:
|
Hand protection: Use protective gloves. It is recommended that gloves are made of the following material: Nitrile rubber. It should be noted that liquid may penetrate the gloves. Frequent changes are recommended. Respiratory protection: Respiratory protection must be used if the airborne contamination exceeds the recommended occupational exposure limit. Wear a respirator fitted with the following cartridge: organic vapour fitter. Please note that insulation varnish is a liquid type that is highly flammable and extremely dangerous if inhaled. Therefore, do not use the product when smoking or near other flammable objects. Please refer to the full list of “Hazard statements” below.
|
|
Storage condition: |
Should be stored at room temperature, dry, clean and well-ventilated warehouse. Must not be stored near the fire source, heating and by sunlight. Best kept erect. When done using the product, close the lid to avoid evaporation which might affect the insulation quality of the product. |
|
Application: |
Suitable for noise reduction in small transformers and moisture protection, anti-tracking and tropicalisation on all types of electrical equipment. Supplied as a ready for use viscosity for dipping and spray application. When applied to cores before rewinding, this product significantly shortens rewinding time. It is highly effective in sealing potential leakage paths, including high voltage transformers, circuit boards and other coils. |
|
Reading materials: |
|
 |
 |
